liquid infiltration meaning in English
液体渗入
Examples
- The on - line liquid infiltration joining of 2d c / sic with different holding times at 1300t was carried out . the strength and the microstructure of the joints were studied , the joining mechanism was analyzed and the best holding time was obtained
在1300 、不同保温时间条件下对二维c sic复合材料进行连接，并进行强度测试及显微结构观察，分析连接机理，得到最佳保温时间。 - The on - line liquid infiltration joining of 3d c / sic at different joining temperatures with the holding time of 45 min was carried out . the strength and the microstructure of the joints were studied , the joining mechanism was analyzed and the best joining temperature was obtained
在保温时间为45min 、不同连接温度条件下对三维c sic复合材料进行连接，并进行强度测试及显微结构观察，分析连接机理，得到最佳连接温度。 - The simulation results conform with the test results , which certificate the model . the liquid infiltration - extrusion process is simulated lively by the superiority and powerful nonlinear solution function of the fem software , the perfect contours and curves are obtained
并且利用有限元软件的优越性和强大的非线性求解功能，对液态浸渗挤压过程进行了很好的模拟，利用软件完善的后处理功能，得到了完美的等值线和带状云图。 - The fiber reinforced ceramic matrix composites are porosity , and the porosity will decrease with the time of vapor deposition increase during the manufacture of the materials . based on the characteristic , an on - line liquid infiltration joining process fit for the composites were investigated
利用化学气相沉积制备的纤维增韧陶瓷基复合材料具有一定的孔隙率，而且这些孔隙率在材料的制备过程随沉积时间增加而减少这一特点，发展一种特别适合于纤维增韧陶瓷基复合材料的在线液相渗透连接方法。 - In this paper , the temperature fields during liquid infiltration extrusion of composites are simulated with the fem , the seepage fields of liquid metal are simulated with the fdm . both the temperature fields and the seepage fields are coupled , the temperature variation curves , infiltration front process curves and velocity variation curves with time are obtained
本文采用有限元法模拟了液态浸渗挤压复合材料浸渗过程温度场，采用有限差分法模拟了液态金属渗流场，将两者间接耦合分析计算，得到了浸渗区域的温度变化曲线、浸渗前沿及浸渗速度随时间变化等曲线。